Marine NAVCOM, Automation, LSA-FFA & Airtime Service Provider at Chennai Port (ChPT)
Tamil Nadu Coromandel Coast Gateway · India · Certified 24/7 Berth & Anchorage Attendance · NAVCOM, Automation, LSA-FFA & Satcom
🚨 24/7 Port Attendance Desk: Engineers on standby for Chennai Port (ChPT) berth & anchorage calls. Guaranteed 2–4 hr response SLA.
Seanav Marine Pvt Ltd is the premier Marine NAVCOM service provider at Chennai Port (ChPT) and across all Indian ports. Operating 24/7 flying squads with guaranteed 2–4 hour response, our factory-trained marine electronics engineers deliver certified radar repair (magnetron renewal & RF tuning), gyrocompass overhaul (gyrosphere renewal & fluid change), ECDIS software maintenance & sensor interfacing, GMDSS annual safety radio surveys, Shore-Based Maintenance (SBM) certificates, Cargo Ship Safety Radio Certificate Form R endorsement, VDR/S-VDR Annual Performance Tests (APT), AIS reprogramming, autopilot calibration, and echo sounder servicing under major IACS class society approvals (IRS, DNV, ABS, LR, ClassNK, BV, RINA) for Furuno, JRC, Cobham Sailor, Transas, Sperry Marine, Raytheon Anschütz, Tokyo Keiki, and Yokogawa.
Seanav Marine Pvt Ltd delivers certified marine automation and control engineering at Chennai Port (ChPT): 15 PPM Bilge Alarm calibration (IMO MEPC.107(49)) with test cell renewal for Deckma Hamburg (OMD-24, OMD-2005, OMD-2008) and Rivertrace (Smartcell), Oil Discharge Monitoring Equipment (ODME) calibration & 5-year survey (IMO MEPC.108(49) & MEPC.240(65) for Rivertrace, JOWA, VAF Instruments, and KSB Seil), Engine Alarm Monitoring System (AMS / ERAMS) diagnostics, Boiler Automation & Burner Safety Management (BMS), Power Management System (PMS) tuning & generator synchronization, Crankcase Oil Mist Detector (OMD) calibration (IACS UR M10 for Schaller Visatron, Daihatsu, Graviner), Ullage Temperature Interface (UTI) meter/tape calibration, and Marine PLC & HMI touchscreen programming. 24/7 attendance across all berths and outer anchorages.
Seanav Marine coordinates and delivers comprehensive statutory LSA & FFA inspection, testing, and certification at Chennai Port (ChPT). In compliance with SOLAS and IMO MSC.402(96), our certified teams conduct annual and 5-year lifeboat, rescue boat, and davit proof load testing with certified water bags, on-load/off-load release mechanism overhauls (IMO MSC.1392), inflatable liferaft servicing and Hammar H20 HRU replacement, foam concentrate sample laboratory analysis (IMO MSC.1/Circ.1312) with 24-hr class-approved lab reports, fixed CO2 fire suppression system surveys with ultrasonic liquid level testing, cylinder hydrostatic testing, SCBA/EEBD breathing air quality testing (EN 12021), and portable fire extinguisher maintenance under full DG Shipping and IACS class authorization.
Seanav Marine provides turnkey maritime satellite airtime activation, hardware servicing, and cyber security solutions at Chennai Port (ChPT) in full compliance with DoT IFMC regulations for Indian territorial waters. We supply, install, and commission high-speed Starlink Maritime Flat High-Performance terminals with 50GB, 1TB & 5TB priority mobile data plans, Peplink / Pepwave marine SD-WAN multi-WAN router bonding (Starlink + 4G/5G LTE + VSAT failover), IMO MSC.428(98) vessel cyber security network segmentation, Inmarsat-C GMDSS terminals with annual LRIT and SSAS performance testing, FleetBroadband (FBB) airtime plans, Iridium Certus maritime safety satcom (Lars Thrane LT-3100S), and commercial Ku/Ka-Band VSAT systems for continuous offshore vessel connectivity.
⚓ Operational Port Logistics & Boarding Specifications
INMAAPort Overview
Chennai is a strategic calling point for international shipping within Tamil Nadu east coast, India. Vessels trading through Chennai require dependable marine navigation, communication, and survey-ready equipment to meet commercial schedules and regulatory inspections. Seanav Marine coordinates port attendances for ship managers, technical superintendents, and chief engineers who need gyro compass service, GMDSS support, radar repairs, Marine GPS / DGPS receiver repair, Navigation Echo Sounder calibration, Marine ECDIS software updates & dual-redundant LAN syncing, Marine Autopilot heading control, Marine Gyro Repeater optical pelorus alignment, Inmarsat-C GMDSS Sat-C terminal repair & antenna testing, Marine MF/HF DSC transceiver repair & ATU antenna tuning, and navigation spares without prolonging port time. Operating directly from our regional maritime engineering hub in Chennai and central logistics facility in Navi Mumbai, we leverage domestic transport corridors, rapid air freight, and established Indian ship agency networks to reach Chennai Port berths and outer anchorages efficiently. Whether your fleet includes tankers, container ships, bulk carriers, or offshore support units, our team plans work around pilot boarding, terminal safety rules, and local weather patterns that affect compass swings and antenna lifts. Superintendents should share ETA, berth or anchorage details, and open defect lists early so we can stage parts before arrival at Chennai. Many owners first contact Seanav when a Port State Control deficiency or class recommendation must be closed before departure from India.
Logistics And Operations
Port operations at Chennai involve coordination between the vessel master, local agent, Chennai Port Trust authorities, and terminal operators. Seanav Marine prepares port gate passes, customs declarations, packing lists, and technician safety compliance documents for attendance across all berths and Chennai outer roads. For heavy or hazardous navigation spares, we coordinate customs clearance under customs bonded transit or direct ship-spares-in-transit procedures through your nominated agent at Chennai. Lead times from our local and Mumbai inventory are immediate for common Marine GPS / DGPS receivers (Furuno, JRC), active antennas, dual-frequency echo sounder transducers, Marine MF/HF transceivers & antenna couplers (Sailor, Furuno, JRC), Inmarsat-C GMDSS transceivers & antenna domes (Cobham Sailor, Furuno FELCOM, JRC), Marine Gyro Repeaters, pelorus stands, Marine Autopilot feedback units, steering solenoid cards, Marine ECDIS processors & solid-state drives, trackballs, gyro, radar, magnetrons, backup batteries, and GMDSS items; specialist manufacturer parts are expedited via Chennai International Airport (MAA). We document all serial numbers, calibration offsets, and software versions changed during attendance so your ISM records remain audit-ready. If the vessel must shift berth or sail early, we prioritise tasks that clear Port State Control or class conditions first. Night or weekend boarding at Chennai is standard procedure with harbor master clearance; our safety protocols strictly comply with hot work and RF radiation zones before technicians ascend masts.
Regulations And Surveys
Ships calling Chennai remain subject to SOLAS, Indian Merchant Shipping Act, Directorate General of Shipping (DGS) notices, and Port State Control examinations covering GMDSS, magnetic compass, gyro, AIS, ECDIS, and VDR carriage. Seanav Marine coordinates GMDSS safety radio surveys across all IACS (ABS, BV, CCS, CRS, DNV, IRClass/IRS, KR, LR, ClassNK, PRS, RINA, TL) and Non-IACS classification societies through our accredited channel partner network — supplying batteries, HRUs, antennas, and test documentation. Magnetic compass correction and deviation card issuance are conducted by qualified MCA approved compass adjusters off Chennai roads when steady headings are steered. For gyro compasses, manufacturer annuals, sensitive element overhauls, and error checks prevent voyage delays and autopilot reference drift. Radio licence compliance and WPC maritime mobile formalities are reviewed against approved bridge documentation before surveyors attend. Our service reports include full equipment test sheets accepted by class societies. VDR and S-VDR annual performance tests (APT) are executed with certified download verification and acoustic beacon certification before survey expiry.
Services At Berth
Typical services at Chennai include statutory GMDSS radio safety surveys for all class societies, Marine GPS & DGPS navigation receiver repairs, masthead active antenna testing, Marine ECDIS dual-redundant route sync & IHO Presentation Library 4.0 compliance, NMEA interfacing to dual ECDIS, Marine Autopilot heading control calibration, Bridge Wing Gyro Bearing Repeater synchronization, Inmarsat-C GMDSS terminal repair, antenna coaxial VSWR testing, live LES PVT testing, LRIT CTR certification, covert SSAS alert checks, Marine MF/HF DSC transceiver power calibration, ATU copper earthing and spark-gap insulator renewal, NBDP radiotelex printer servicing, Navigation Echo Sounder acoustic depth verification and transducer replacement, Gyro annual maintenance, Radar magnetron and front-end replacement, ECDIS kernel and sensor interfacing, plus supply of VDR capsules, HRUs, emergency batteries, and NAVTEX receivers from Seanav Marine local inventory. Our engineers attend with factory calibration tools for gyro, radar, and GMDSS manufacturers commonly installed on vessels trading the Indian east coast. We frequently combine multiple requirements in one attendance — such as GMDSS battery load testing, AIS programming, and radar performance monitor check during a single cargo window. For new retrofit projects, we commission Starlink maritime terminals, VSAT links, and bridge navigation modernization. Spares are pre-cleared for prompt launch or jetty delivery. When complex electronics require bench diagnosis, our specialized workshop provides micro-soldering, RF testing, and service exchange units.
Automation Services At Port
Seanav Marine deploys factory-trained automation and instrumentation engineers across all Chennai Port berths, container terminals, private jetties, and Chennai outer roadstead anchorage:
1. 15 PPM Bilge Alarm Calibration & OWS Servicing: Annual calibration of bilge monitors under IMO MEPC.107(49) and MEPC.60(33). Test cell clean, zero/span calibration with certified reference liquids, 3-way sample diversion valve test, and statutory calibration certificates issued on board for Deckma (OMD-24, OMD-2005, OMD-2008), Rivertrace (Smart Cell, OCD 1M), and Fellow Kogyo units.
2. Engine Alarm Monitoring System (AMS / ERAMS): Diagnostic troubleshooting, analog/digital I/O card repair, RTD/thermocouple temperature sensor loop calibration, 4-20mA pressure transmitter testing, alarm printer interfacing, and network node synchronization for Kongsberg (K-Chief, AutoChief), Lyngso Marine (UCS 2100), Nabtesco, Daihatsu, and CSSC systems.
3. Marine Boiler Automation & Burner Management (BMS): Complete combustion safety audits, optical flame scanner tuning, fuel-to-air servo ratio adjustments, steam drum water level differential pressure transmitter calibration, automatic blowdown valve servicing, and safety interlock trip testing for Aalborg, KangRim, SAACKE, and Volcano marine auxiliary boilers.
4. Power Management System (PMS) & Generator Synchronization: Automated diesel generator load sharing, frequency and voltage droop calibration, auto-synchronizing relay testing, preferential trip simulation, blackout start sequencing, and Woodward / Deif / Terasaki governor and AVR interfacing.
5. Crankcase Oil Mist Detector (OMD) Servicing & Calibration: IACS UR M10 and SOLAS Chapter II-2 compliant optical calibration, suction fan impeller overhaul, sampling pipe valve cleaning, optical lens zero balance, and opacity alarm trip verification for Schaller Automation (Visatron VN115/87, VN116/87, VN215/87, VN215/93), Graviner (Mark 6, Mark 7), and Daihatsu units.
6. Valve Remote Control (VRC) & Hydraulic Ballast Automation: Hydraulic solenoid valve block overhaul, pneumatic actuator seal renewals, emergency manual pump calibration, and electro-hydraulic tank level gauging sensor integration (Pleiger, Danfoss / Damcos, Emerson Marine, Nakakita).
7. Marine PLC & HMI Programming & Diagnostics: Troubleshooting and logic modification for marine-grade PLCs (Siemens S7-1200/1500/300/400, Allen-Bradley ControlLogix, Mitsubishi MELSEC, Omron), communication driver configuration (Modbus RTU/TCP, Profibus DP, CAN bus), and HMI touch panel replacement.
Why Seanav Marine
Seanav Marine is the preferred partner for Chennai port calls because we combine indigenous Indian spares inventory, approved compass adjusters, accredited class surveyors across all IACS and Non-IACS societies, and transparent communication with technical managers worldwide. We understand tight turnaround schedules at Chennai container and bulk terminals and scope work realistically for the available port stay. Contact service@seanav.org or +91 88508 49050 with your vessel itinerary to receive an immediate attendance quotation and technical method statement. Explore our GMDSS radio survey, gyro overhaul, and bridge navigation pages for comprehensive regulatory guidelines. Our mission is to leave your vessel fully compliant, seaworthy, and cleared for its onward passage from the Bay of Bengal.
Local Fleet Practice
Ship operators calling Chennai balance cargo operations, bunkering, and crew logistics alongside statutory navigation maintenance. Seanav documents every attendance with high-resolution photographic evidence, signed test records, and parts batch traceability suitable for vetting inspections and internal audits. We maintain daily coordination with local ship agents, customs brokers, and Chennai Port marine departments, eliminating administrative bottlenecks. For fleet owners operating along the Indian coastline, Seanav provides multi-port service coverage across Chennai, Ennore (Kamarajar), Kattupalli, and Krishnapatnam with uniform service standards and consolidated technical reporting.
Frequently Asked Questions — Marine NAVCOM, Automation & LSA/FFA at Chennai Port (ChPT)
Does Seanav Marine provide certified Marine NAVCOM repair, maintenance, and overhaul at Chennai Port (ChPT)?
Yes, Seanav Marine Pvt Ltd is the premier Marine NAVCOM service provider at Chennai Port (ChPT). We deploy factory-trained marine electronics engineers 24/7 to berths and outer anchorages for radar repair and magnetron tuning, gyrocompass overhaul and sphere renewal, ECDIS maintenance, GMDSS radio surveys, VDR/S-VDR APT, AIS programming, autopilot calibration, and echo sounder servicing.
Can Seanav Marine conduct Class-approved GMDSS radio surveys and VDR APT at Chennai Port (ChPT)?
Yes. Seanav Marine conducts statutory GMDSS Safety Radio Surveys (SOLAS Chapter IV) and Voyage Data Recorder (VDR / S-VDR) Annual Performance Tests (APT compliant with IMO MSC.1/Circ.1222) at Chennai Port (ChPT) under authorization from major IACS classification societies including IRS, DNV, ABS, LR, ClassNK, BV, and RINA.
What marine electronics brands does Seanav Marine service at Chennai Port (ChPT)?
Seanav Marine supports all major marine navigation and communication OEMs at Chennai Port (ChPT) including Furuno, JRC, Sailor / Cobham, Sperry Marine, Tokyo Keiki, Yokogawa, Raytheon Anschütz, Danelec Marine, Jotron, and Samyung ENC, backed by ready-stock spares and calibrated test equipment.
Does Seanav Marine provide 15 PPM Bilge Alarm calibration at Chennai Port (ChPT)?
Yes, Seanav Marine deploys certified marine automation engineers 24/7 to all berths and outer anchorages at Chennai Port (ChPT) to perform 15 PPM Bilge Alarm monitor calibration compliant with IMO MEPC.107(49), optical test cell verification, 3-way sample diversion valve testing, and renewal certification on board for Deckma, Rivertrace, and Fellow Kogyo systems.
Can you service Engine Alarm Monitoring Systems (AMS) at Chennai Port (ChPT)?
Yes, our flying squad diagnoses and repairs marine Engine Alarm Monitoring Systems (AMS/ERAMS), input/output (I/O) modules, RTD temperature loops, 4-20mA pressure transmitters, and communication networks at Chennai Port (ChPT) for Kongsberg, Lyngso Marine, Nabtesco, and other leading manufacturers.
Do you offer Boiler Automation and Burner Management services at Chennai Port (ChPT)?
Yes, Seanav Marine services auxiliary boilers, burner management systems (BMS), optical flame scanners, fuel-air ratio controls, and water level safety cut-outs at Chennai Port (ChPT) berths and anchorages for Aalborg, KangRim, SAACKE, and Volcano marine auxiliary boilers.
Does Seanav Marine provide Lifeboat & Davit annual and 5-year inspections at Chennai Port (ChPT)?
Yes. In strict compliance with IMO MSC.402(96) and SOLAS Chapter III, Seanav Marine deploys certified technicians to conduct annual and 5-year lifeboat, rescue boat, release mechanism overhaul, dynamic winch brake tests, and full davit load testing using calibrated water bags at Chennai Port (ChPT) berths and shipyards under major IACS class society oversight.
Can Seanav Marine inspect and service Fixed CO2 Fire Fighting Systems and Extinguishers at Chennai Port (ChPT)?
Yes. Seanav Marine provides complete marine fire-fighting appliance (FFA) servicing at Chennai Port (ChPT), including fixed high-pressure CO2 system surveys, level checks (ultrasonic/weight), blow-through tests, cylinder hydrostatic pressure testing, portable fire extinguisher inspection and refill, deck foam system expansion testing, and SCBA/EEBD cylinder hydro-testing.
Does Seanav Marine service Inflatable Liferafts and provide Hammar HRUs at Chennai Port (ChPT)?
Yes, we coordinate annual liferaft survey, inflation testing, container overhaul, pyrotechnic replenishment, and Hammar H20 hydrostatic release unit (HRU) replacement across all berths and anchorages at Chennai Port (ChPT).
Can Seanav Marine supply and activate Maritime Satellite Airtime and Starlink at Chennai Port (ChPT)?
Yes, Seanav Marine is the authorized maritime satellite service provider at Chennai Port (ChPT). We handle complete hardware supply, installation, antenna mounting, and airtime activation for Starlink Maritime (Ku/Ka-Band high-speed internet), Inmarsat-C GMDSS polling, FleetBroadband, and Iridium Certus offshore connectivity.
How fast can an engineer board a vessel at Chennai Port (ChPT) for NAVCOM, Automation or Safety emergencies?
Seanav Marine guarantees a 2 to 4 hour emergency boarding attendance SLA across all Chennai Port (ChPT) berths and launch piers, with pre-cleared harbor security passes, certified calibration gear, and Class-approved spare parts.
Plan your Chennai Port (ChPT) port call
Share your ETA, berth, and equipment list — our 24/7 operations desk coordinates engineers, spares, and survey documentation for Chennai Port (ChPT) and Tamil Nadu Coromandel Coast Gateway.
Marine NAVCOM, Automation, LSA-FFA & Airtime Service Provider at Chennai Port (ChPT)
Seanav Marine is an accredited, ISO 9001:2015 certified marine service provider delivering 24/7 technical attendances, statutory Class surveys, calibration, and emergency repairs for vessels calling at Chennai Port (ChPT), India. Operating rapid-deployment flying squads, our engineers board vessels at berth or offshore anchorage with a guaranteed 2 to 4 hour response SLA.
24/7 Operations Desk: Phone: +91 88508 49050 · WhatsApp: +91 88508 49050 · Email: service@seanav.org
YDK Technologies equipment enquiries for Chennai Port (ChPT)
For a vessel calling at Chennai Port (ChPT), India, send the YDK or legacy Yokogawa model, full part reference, fault or maintenance requirement, agent and ETA/ETD. The desk checks supported repair or overhaul scope, parts, delivery and attendance arrangements for the actual call.
YDK Technologies CMZ900 Gyrocompass · YDK Technologies MKR050 Gyro Repeater Compass · YDK Technologies EML500 Electromagnetic Speed Log · YDK Technologies PT900 Marine Autopilot
All YDK products, spares and service guidance. Port-directory inclusion identifies an enquiry location; availability, access and equipment-specific authorization must be confirmed before booking.