Lifeboat & Rescue Boat Annual & 5-Year Inspection (IMO MSC.402(96)) India
Seanav Marine coordinates and delivers annual and 5-year statutory inspections for lifeboats, rescue boats, davits, and dynamic winch brake systems across all Indian ports under IMO Resolution MSC.402(96) via accredited channel partners. Certified engineers perform dynamic 1.1x overload brake drop tests, on-load release hook overhauls, and hydraulic launch trials with full Class endorsement.
Supported OEM Equipment & Multi-Make Coverage
Our marine electronics engineers are factory-trained with proprietary OEM diagnostic interfaces, software keys, and genuine spare parts for leading bridge manufacturers:
Technical Specifications & Operational Coverage
| Statutory Mandate | SOLAS Chapter III Reg 20, IMO Resolution MSC.402(96), MSC.1/Circ.1578 |
|---|---|
| Supported OEMs | Zodiac, Fassmer, Hatecke, Palfinger Marine, Schat-Harding, Jiangyin Wolong, Hyundai Lifeboats |
| Testing Equipment | Calibrated water weights (500kg - 10-ton bags), certified load cells, hydrostatic hook overhaul tooling |
| Scope of Work | Annual Thorough Examination, 5-Year Dynamic 1.1x Winch Brake Test, On-Load Release Hook Servicing, Engine Overhaul |
| Class Approvals | IRS, DNV, ABS, ClassNK, Bureau Veritas, Lloyd's Register, Maritime & Port Authority recognized |
Standard 6-Step Lifeboat & Davit Statutory Inspection Protocol
Our Class-approved technicians execute this standardized procedural workflow to ensure first-time compliance with attending Class surveyors and Indian Port State Control (PSC) inspectors:
-
Davit Structure & Wire Fall Visual Non-Destructive Inspection
Examine davit arms, sheaves, foundation bolts, and inspect wire falls for corrosion, kinking, and 5-year replacement certification.
-
Lifeboat Winch & Centrifugal Brake Dynamic Drop Test
Test primary winch manual brake, centrifugal speed governor, and conduct 1.1x full working load dynamic drop test.
-
On-Load Release Gear Servicing & Hydrostatic Interlock Check
Dismantle, clean, and grease on-load release hooks; test hydrostatic interlock to prevent accidental hook release above water.
-
Lifeboat Propulsion Engine & Fuel System Sea Run
Conduct 4-hour cold-start and run test on inboard marine diesel engine, verifying dual battery starting circuits and reverse gear.
-
Sprinkler System & Compressed Air Bottle Charge Verification (Tanker Lifeboats)
Test external water spray pump and inspect compressed air breathing air cylinders, verifying 10-minute positive pressure hold.
-
Class Surveyor Sign-off & Statutory Certificate Issuance
Witness final lowering/hoisting demonstration with Class Surveyor; issue official IMO MSC.402(96) Certificate of Inspection.
24/7 Port & Anchorage Attendance Across India
Seanav Marine provides rapid shore-based and offshore launch boat boarding across all 170+ Major and Minor Indian Ports, including:
Download IMO MSC.402(96) Lifeboat Pre-Survey Preparation Guide
Verify davit wire falls, hook release clearances, and engine readiness prior to mandatory 5-year load testing.